February is coming to an end today! Tonite is the 15 day of Chinese New Year. Time pass so fast that I have hard time catching up. I have alot of thing I wanna do but I have no time. Everyday wakeup go to work and come back sleep.
March is coming and the 1st quarter is coming to an end.
I will be going to Singapore on 2-6 of March 2010 for seminar. This is the 1st time after like 10 over year I step out of the land of Malaysia. Hope this time I will get alot of picture to share with u all.
Carling Cup final between Man Utd and Aston Villa. Man Utd will win this. I predict 2-0....
So long for now... Will update when I come back from Singapore!!!
See Ya!!!
Sunday, February 28, 2010
Thursday, February 11, 2010
sww10 – solidworks 2011 preview
As many of you know, the Wednesday General Session at SolidWorks WORLD is one of the most anticipated sessions every year because you get to see a sneak peak at the next major release of the software. This year, like many others did not disappoint. Below you can find a list of the enhancements that were shown at SolidWorks WORLD 2010 for the SolidWorks 2011 release. Here are some of the top enhancements that I am looking forward to it SolidWorks 2011.
Memory Usage Enhancements
As has been the theme the last couple of years it looks like once again the developers have put a focus on making the product better and not just about adding new features. The graph the was shown showed around a 460MB usage savings on a model between SolidWorks 2010 and SolidWorks 2011.
Reliability Enhancements
As with memory usage, it looks like reliability was thankfully taken serious again this year at SolidWorks Corp. as the chart showed almost a double in reliability from SolidWorks 2010 to SolidWorks 2011.
Feature Lock
This is no doubt my front runner for most anticipated NEW feature in SolidWorks 2011. This feature will allow the user to place a lock in his/her feature tree and none of the features listed above the lock will be rebuilt until the lock is moved or removed.
Cut Sweep in Assembly
I can imagine some great opportunities to use the new feature in my daily design. In previous releases you could mainly only do an extruded or revolved cut. In 2011 you can add a cut sweep to that as well.
Extrude Revolve Up to Surface
How many times have you done this. Create an extrude revolve and then have to thumb wheel your preview until you get up to a surface. I have and starting in SolidWorks 2011 you will be able to just select “Up to Surface” as your end condition and be done with it.
Thumb Wheel to Change Spacing of Dimensions
I am always a sucker for making this quicker to access so I enjoy seeing the ability to change the spacing between your dimensions with the thumb wheel on your mouse.
De-feature to Remove Internal Features of a Part in Assemblies
De-feature, huh? This will allow you to “dumb” down your design before you send it off to a customer in order to protect your data and I am sure make the file size smaller. You can select certain features or outside faces and let SolidWorks “dumb” down the rest of your model before you publish it to the world.
Walk Thru Functionality in Assemblies
Not sure this is something I will use but I think it is cool to have the ability to do it anyways. If nothing else, it will be fun to play with for me. This new feature allows you to walk through your design similar to the way you would in a video game.
Dual Dimensions Allowed in Hole Table
You can never have to much information right. In SolidWorks 2011 you will be able to show dual dimensions in your hole tables.
PhotoView 360 Preview Inside SolidWorks
ALT-Tab, ALT-Tab, ALT-Tab…no more. No longer will you need to switch back and forth as much between windows when working on a rendering. PhotoView 360 will have a preview window right inside SolidWorks beginning in SolidWorks 2011.
The Rest of the Enhancements Previewed
Display Manager
Customizable real view
Pre rendered animations
Planar simulation
Chamfers and fillets for weld prep
Weld gaps with actual geometry
Multiple piping enhancements
Dimensions spaced evenly and in the right view (on new views, or to correct existing views)
Weld tables in drawings
Automatic weld callouts
Now keep in mind, these are just a preview of some of the enhancements. There will be many more coming August/September when the NDA is lifted.
Taken from rocksolidperspective
Memory Usage Enhancements
As has been the theme the last couple of years it looks like once again the developers have put a focus on making the product better and not just about adding new features. The graph the was shown showed around a 460MB usage savings on a model between SolidWorks 2010 and SolidWorks 2011.
Reliability Enhancements
As with memory usage, it looks like reliability was thankfully taken serious again this year at SolidWorks Corp. as the chart showed almost a double in reliability from SolidWorks 2010 to SolidWorks 2011.
Feature Lock
This is no doubt my front runner for most anticipated NEW feature in SolidWorks 2011. This feature will allow the user to place a lock in his/her feature tree and none of the features listed above the lock will be rebuilt until the lock is moved or removed.
Cut Sweep in Assembly
I can imagine some great opportunities to use the new feature in my daily design. In previous releases you could mainly only do an extruded or revolved cut. In 2011 you can add a cut sweep to that as well.
Extrude Revolve Up to Surface
How many times have you done this. Create an extrude revolve and then have to thumb wheel your preview until you get up to a surface. I have and starting in SolidWorks 2011 you will be able to just select “Up to Surface” as your end condition and be done with it.
Thumb Wheel to Change Spacing of Dimensions
I am always a sucker for making this quicker to access so I enjoy seeing the ability to change the spacing between your dimensions with the thumb wheel on your mouse.
De-feature to Remove Internal Features of a Part in Assemblies
De-feature, huh? This will allow you to “dumb” down your design before you send it off to a customer in order to protect your data and I am sure make the file size smaller. You can select certain features or outside faces and let SolidWorks “dumb” down the rest of your model before you publish it to the world.
Walk Thru Functionality in Assemblies
Not sure this is something I will use but I think it is cool to have the ability to do it anyways. If nothing else, it will be fun to play with for me. This new feature allows you to walk through your design similar to the way you would in a video game.
Dual Dimensions Allowed in Hole Table
You can never have to much information right. In SolidWorks 2011 you will be able to show dual dimensions in your hole tables.
PhotoView 360 Preview Inside SolidWorks
ALT-Tab, ALT-Tab, ALT-Tab…no more. No longer will you need to switch back and forth as much between windows when working on a rendering. PhotoView 360 will have a preview window right inside SolidWorks beginning in SolidWorks 2011.
The Rest of the Enhancements Previewed
Display Manager
Customizable real view
Pre rendered animations
Planar simulation
Chamfers and fillets for weld prep
Weld gaps with actual geometry
Multiple piping enhancements
Dimensions spaced evenly and in the right view (on new views, or to correct existing views)
Weld tables in drawings
Automatic weld callouts
Now keep in mind, these are just a preview of some of the enhancements. There will be many more coming August/September when the NDA is lifted.
Taken from rocksolidperspective
Tuesday, February 9, 2010
New Job, New Challenge!
This is the 3rd week I start working at this new company.
To start it off, This company I working now is called CADVision. It focus on Dassault Systemes Solidwork product. My job scope is on sales and technical (EPDM).
It whole new experience for me as I never really work on software company before. I need to make cold calling to company around Penang, Kedah and Perak. It really scare to make cold calling as 10 call u make 9 call will be rejected. I have a whole list of potential customer (100+) that I have to call. Hope at least I can meet up with 10 of them and show them some demo on what solidwoks can do to help them on developing new product to the market.
If u interested to know more about Solidworks, can email me at joey_poon@cad-vision.com
I will be away until after Chinese New Year to study on EPDM and celebrate CNY.
Until then!!!
Happy Chinese New Year to all my Chinese friend out there!!!!
To start it off, This company I working now is called CADVision. It focus on Dassault Systemes Solidwork product. My job scope is on sales and technical (EPDM).
It whole new experience for me as I never really work on software company before. I need to make cold calling to company around Penang, Kedah and Perak. It really scare to make cold calling as 10 call u make 9 call will be rejected. I have a whole list of potential customer (100+) that I have to call. Hope at least I can meet up with 10 of them and show them some demo on what solidwoks can do to help them on developing new product to the market.
If u interested to know more about Solidworks, can email me at joey_poon@cad-vision.com
I will be away until after Chinese New Year to study on EPDM and celebrate CNY.
Until then!!!
Happy Chinese New Year to all my Chinese friend out there!!!!
Classic Amps: The Early ’60s Vox AC30
The old adage holds that imitation is the sincerest form of flattery, but it’s also an easy gauge of any vintage amp’s “classic” status within the realm of great amps designed in the past 60 years. A quick tally of contemporary amps inspired by the AC30 — which includes great models from boutique makers such as Matchless, Dr Z, Bad Cat, TopHat, 65 Amps, Trainwreck, Bruno, Komet, and several others — shows us just how inspirational Vox’s 50-year-old circuit has been, and how secure its status as one of just a handful of seminal blueprints.
Like so many other great guitar and amp companies, Vox’s roots are pre-rock and roll, but the eventual boom in this new musical genre would help to secure its success. Tom Jennings, himself an accomplished accordionist, built electronic organs in the 1940s and started his Jennings Organ Company in 1951 to sell portable organs. He founded Vox amps’ original manufacturer, Jennings Musical Instruments (JMI) in 1957 with the specific intention of cashing in on the British rock and roll boom, and while the AC30 wasn’t Vox’s first model, it was the amp that really put the name on a bigger map.
The AC30 is a descendent of Vox’s first successful amp of the late 1950s, the AC15. While many guitar amps of the day were derived from circuits published by tube manufacturers for general amplifier applications in radios and gramophones, Dick Denney, the electronics wizard who designed the AC15 for Jennings, approached the job with the guitar’s own sonic performance in mind, adapted these circuits accordingly, and the results speak for themselves. This amp’s cathode biasing and lack of negative feedback give plenty of sparkling, slightly unchained chime to the guitar’s upper-mids and highs, thanks to the way they encourage second harmonics as artifacts of distortion. This offers a flattering tonality at low and middle volume levels, and a creamy overdrive when cranked (note that these design elements just aren’t suitable in larger amps, so you don’t see them in 50W or 100W models). Also, in letting the output stage run “open loop” – that is, free from any negative feedback-derived damping – Denney’s design offered a rich, touch-sensitive, and therefore very playable performance when pushed. These amps’ tube rectifiers also add to the touch-sensitive, slightly compressed playing feel that so many players love. While both the AC15 and AC30 are often sited as “classic class A amps”, it is probably more accurate to sum up their sound as the result of these features: their cathode biasing, lack of negative feedback, tube rectifier, and easily overdriven EL84 output tubes.
With rock and roll’s continued growth, a more powerful amp was needed, and by the late ’50s the popular British group The Shadows (featuring Hank Marvin on guitar) came knocking to ask Jennings and Denney to build them a more powerful amplifier. In late 1959 Denney and Jennings simply doubled the 2xEL84 output stage of the AC15 to give birth to the 4xEL84 AC30 – a more versatile and more rocking amp all-round, which is actually capable of putting out more than 35W in good condition. (Note that AC15s and early AC30/4 combos both used the lesser-seen EF86 preamp pentode preamp tube, but this was soon dropped in the AC30 for the more plentiful and reliable ECC83/12AX7 type. Several contemporary makers, however, have rediscovered the juicy EF86 and currently use it in their own designs.)
The AC30 originally carried a simple, single treble-bleed Tone control, plus a Cut (or “High Cut”) control that rounded off the harsher highs at the output stage. The archetypal AC30 was born a couple years after its introduction, however, when the powerful, interactive Top Boost EQ circuit was added in 1961. This at first came as a back-to-factory retrofit modification, which included adding the extra preamp tube required and mounting the Top Boost’s Treble and Bass controls on a plate bolted to the amp’s back panel. In 1964 the AC30 Top Boost model came direct from the Vox factory as an upgrade option, with the extra knobs mounted right on the main control panel. Wherever you find it, this Top Boost EQ stage adds the extra sparkle and high-end content that bands of the day were looking for to help them cut through the mix, and is a big part of that classic Vox shimmer and chime. Another big ingredient in the classic AC30 stew is the Celestion G12 alnico speaker, originally re-branded with a Vox label and now re-released by Celestion as the Alnico Blue. This great speaker is sweet and multi-dimensional when played clean, but aggressive and harmonically rich when driven hard. It’s highly efficient 100 dB rating also helps to make a 2x12” AC30 combo a low louder than its size and conservative wattage rating would make it appear.
The AC30 has been played by everyone from The Beatles and The Who, to Yank-janglers such as REM and Tom Petty and the Heartbreakers, to heavy rockers from Brian May right up to Dave Grohl of the Foofighters. It continues, in both its original and reissue formats, to be one of the most popular tube amps in the history of the electric guitar.
Taken from Gibson Tone Tips
Friday, January 29, 2010
Poisonous plant(毒植物）
Don't know how TRUE but better be safe than sorry.
Do you have this plant at home? beware of it coz too hazard to health! Hey frenz...some of you don't read Chinese language but never mind, pls take note coz this is really too alarming to be ignored & i must share w/u guys...
Basically this article warns abt the highly poisonous plant as shown below...so pls be aware now that it seems too hazardous to be placed at home, in office or anywhere near our dwelling places!
Apart fr the poison in the sap of the leaves which causes irritation, inflamation or swelling of the face & jaw esp those with allergic skin when come into contact, this plant is useless in terms of air purification, absorption of other harmful or even cancer causing gases in the air e.g.CO2, CH2O(Formaldehyde)，C2-H-Cl3(Trichloroethylene）...in fact, even the soil where the plant used to grow wld also turn poisonous! So, don't use the soil to plant veggies. Even, insects, ants will not go near to this plant.
Oh dear! too bad, so sad :( don't u think?....such a nice, strong yet elegant plant liked by many just like myself! Incidentally, the Chinese particularly loves this plant owing to it's common name "Gold Coin" tree I guess?? & its glamor & popularity are so amazing during CNY time...esp w/little red ribbons tied to its branches!
Anyway for now, just to be safe, probably we can only be "distant admirers" of this lovely plant ya!
Take care...GOD BLESS!
金钱树 (泽米芋) —— 珍宝还是无形杀手?
相信网友曾经看过这观叶植物。
泽米芋——学名为Zamioculcas zamiifolia ，又名金钱树、雪铁芋、泽米叶天南星、龙凤木，为天南星科、雪铁芋属的罕见观叶植物，作为一种以观叶为主的常绿草本植物。它原产于非洲东部，为林下多年生植物，耐荫、耐旱，怕高湿，怕低温、怕雨淋。金钱树，其实不是树。树一般都是木本，而金钱树却是多年生常绿草本植物。
为何被称作“金钱树”或“金币树”呢？它这令人诱人的名字，不管你上看下看，左看右看，完全没有一点像金钱的样子。它的叶子是卵形冠上金钱两字，会不会有点不伦不类。其拉丁文的种加词“zamiifolia”，意为“泽米叶的”，也就是说它是一种叶片同泽米苏铁（Zamia furfuracea）很相似的天南星类植物，即“泽米叶天南星”。
“金钱”、“金币”之名，可能与其叶轴上的叶片形状、质地、排序有关，它的圆筒形叶轴粗壮而肥腴，其上的小叶呈偶数羽状排列，且叶质厚实、叶色光亮，宛若一挂串连起来的钱币。
金钱树是近年来流行起来的观赏花卉。不论走到任何行业的店铺，办公室或者住宅区，很容易发现到金钱树。有人还自认载种金钱树觉得很自豪，却不知道夺命符已一步一步接近你，其杀伤力分分钟会在你的健康爆发。
金钱树是一种剧毒植物。它的毒比断肠草还要更毒。它的叶汁沾在敏感皮肤上，五官，牙床，会肿胀。对一些曾叶在荒野生长的泽米芋，飞禽走兽，蜂蝶爬虫都不会接近它，同时生长在周边的植物，也会枯死，可见其毒无比。所以，发现有其他可以食用的草本同盆生长，希望大家千万记得别採来药用，否则会死得不明不白。家有此类植物的人士，绝对要小心处理。不要把载种金钱树泥土加入其他食用本草中，它的毒素仍然留在泥土中。
如果你家买了此类植物，最好把它摆远一点，不要让老小接触到它。金钱树也不要放在窗下，它的毒气会影响房中人的健康。如果你不舍弃种，最好多种两三盆虎尾兰，巴西铁树，吊兰等。它们不但可以净化，吸收漂浮在空中有害的气体，二氧化碳 CO2，甲醛 CH2O （Formaldehyde），三氯乙烯C2-H-Cl3（Trichloroethylene）等致癌的气。
人人都视为它如珍宝，都认为摆一盆可招财。若真有效力，那就不会为钱而烦恼，天下再没有穷人，也不会缺钱而向阿隆借钱，更不会有人为钱而死。
千富万富，健康才是真正的财富…… ！
Do you have this plant at home? beware of it coz too hazard to health! Hey frenz...some of you don't read Chinese language but never mind, pls take note coz this is really too alarming to be ignored & i must share w/u guys...
Basically this article warns abt the highly poisonous plant as shown below...so pls be aware now that it seems too hazardous to be placed at home, in office or anywhere near our dwelling places!
Apart fr the poison in the sap of the leaves which causes irritation, inflamation or swelling of the face & jaw esp those with allergic skin when come into contact, this plant is useless in terms of air purification, absorption of other harmful or even cancer causing gases in the air e.g.CO2, CH2O(Formaldehyde)，C2-H-Cl3(Trichloroethylene）...in fact, even the soil where the plant used to grow wld also turn poisonous! So, don't use the soil to plant veggies. Even, insects, ants will not go near to this plant.
Oh dear! too bad, so sad :( don't u think?....such a nice, strong yet elegant plant liked by many just like myself! Incidentally, the Chinese particularly loves this plant owing to it's common name "Gold Coin" tree I guess?? & its glamor & popularity are so amazing during CNY time...esp w/little red ribbons tied to its branches!
Anyway for now, just to be safe, probably we can only be "distant admirers" of this lovely plant ya!
Take care...GOD BLESS!
金钱树 (泽米芋) —— 珍宝还是无形杀手?
相信网友曾经看过这观叶植物。
泽米芋——学名为Zamioculcas zamiifolia ，又名金钱树、雪铁芋、泽米叶天南星、龙凤木，为天南星科、雪铁芋属的罕见观叶植物，作为一种以观叶为主的常绿草本植物。它原产于非洲东部，为林下多年生植物，耐荫、耐旱，怕高湿，怕低温、怕雨淋。金钱树，其实不是树。树一般都是木本，而金钱树却是多年生常绿草本植物。
为何被称作“金钱树”或“金币树”呢？它这令人诱人的名字，不管你上看下看，左看右看，完全没有一点像金钱的样子。它的叶子是卵形冠上金钱两字，会不会有点不伦不类。其拉丁文的种加词“zamiifolia”，意为“泽米叶的”，也就是说它是一种叶片同泽米苏铁（Zamia furfuracea）很相似的天南星类植物，即“泽米叶天南星”。
“金钱”、“金币”之名，可能与其叶轴上的叶片形状、质地、排序有关，它的圆筒形叶轴粗壮而肥腴，其上的小叶呈偶数羽状排列，且叶质厚实、叶色光亮，宛若一挂串连起来的钱币。
金钱树是近年来流行起来的观赏花卉。不论走到任何行业的店铺，办公室或者住宅区，很容易发现到金钱树。有人还自认载种金钱树觉得很自豪，却不知道夺命符已一步一步接近你，其杀伤力分分钟会在你的健康爆发。
金钱树是一种剧毒植物。它的毒比断肠草还要更毒。它的叶汁沾在敏感皮肤上，五官，牙床，会肿胀。对一些曾叶在荒野生长的泽米芋，飞禽走兽，蜂蝶爬虫都不会接近它，同时生长在周边的植物，也会枯死，可见其毒无比。所以，发现有其他可以食用的草本同盆生长，希望大家千万记得别採来药用，否则会死得不明不白。家有此类植物的人士，绝对要小心处理。不要把载种金钱树泥土加入其他食用本草中，它的毒素仍然留在泥土中。
如果你家买了此类植物，最好把它摆远一点，不要让老小接触到它。金钱树也不要放在窗下，它的毒气会影响房中人的健康。如果你不舍弃种，最好多种两三盆虎尾兰，巴西铁树，吊兰等。它们不但可以净化，吸收漂浮在空中有害的气体，二氧化碳 CO2，甲醛 CH2O （Formaldehyde），三氯乙烯C2-H-Cl3（Trichloroethylene）等致癌的气。
人人都视为它如珍宝，都认为摆一盆可招财。若真有效力，那就不会为钱而烦恼，天下再没有穷人，也不会缺钱而向阿隆借钱，更不会有人为钱而死。
千富万富，健康才是真正的财富…… ！
Sunday, January 24, 2010
Eason - Yue Sam Yau Kwai (Guilty Conscience)
YUE GWOH NGOH TENG GOH HOH NGAAN HUNG, HOH YI DOI NEI HO PIN BAT DUNG
JI SAI JO GWOH DOH SIU MEI MUNG, CHI BEI DIK WAI LUN
LIN HAT KOI HAAM KUNG SAM YA TUNG
GING PA FONG WAAI YUNG PO NEI, YEUNG NEI LO FOON YUNG
JUI FOOI MO YUNG, JUEN NGAAN FAAT YIN, NEI SAT JUNG
CHANG TENG SUET GWOH NEI MAU YE GIT FAN, MEI CHANG LO SIU YUNG
SAT JOI BAT GAM JI DO NGOH SI YUEN HUNG
DAAI KOI DONG CHOH NGOH MEI DUNG DAK GOO GEI
NIN SIU LUT SING HOI CHAAM NEI
LING YAN SAU SEUNG JI MEI, NAAN BO GANG HOH BEI
JE SAM DEI, JOI SIN LEUNG JUNG SANG JAM HUI, HEUNG NEI SUET DUI BAT HEI
LEUNG SAM YAU KWAI, YUEN LOI CHUI BIN CHOH SAU, HOH WAI LIU YAN YAT SAI
LAP JI JOH SAI YAN TUET PAN YI WAI
BIN WAI DAAI DO JEUNG DOH MOH YAU WAI
JE JUNG JI WAI, LIN SUI CHANG DOI NGOH HO, DO HOH DAAI LOI SEUNG SAI
BEI NGOH HOI GWOH LOI JIP SAU NGOH GWAI
SI NGOH JOI JAI JO NGAAN LUI, GUI YIN SEUNG GAU SAI
JAU SUEN JIK CHUK HIN JUN GEI FONG CHEK DEI, YI TAAI DOH JAAI MOOT CHUE LEI
LUI YAN LUI GEI JI MEI, YUE SANG YA GEI HEI
SO YAT SO, NGOH SAT CHING BAT JI DAK NEI, YIU SUET GUI DUI BAT HEI
LEUNG SAM YAU KWAI, YUEN LOI CHUI BIN CHOH SAU, HOH WAI LIU YAN YAT SAI
LAP JI JOH SAI YAN TUET PAN YI WAI
BIN WAI DAAI DO JEUNG DOH MOH YAU WAI
JE JUNG JI WAI, LIN SUI CHANG DOI NGOH HO, DO HOH DAAI LOI SEUNG SAI
BEI NGOH HOI GWOH LOI JIP SAU NGOH GWAI
SI NGOH JOI JAI JO NGAAN LUI GUI YIN SEUNG GAU SAI
YUE SAM YAU KWAI, YUEN LOI CHUI BIN CHOH SAU, HOH WAI LIU YAN YAT SAI
LAP JI JOH SAI YAN TUET PAN YI WAI
BIN WAI DAAI DO JEUNG DOH MOH YAU WAI
JE JUNG JI WAI, LIN SUI CHANG DOI NGOH HO, DO HOH DAAI LOI SEUNG SAI
NOI GAU NOI GAU NOI GAU MOOT JOK WAI
JIK DO MAU NIN MAU YAT NGOH NANG ON SIK YUE JONG LAI
YING SEUNG NEI YAT GA HOH DO CHAI
Credit to singklyrics.com
Friday, January 22, 2010
Faulty IC replacement and Passport Application.
Since I have 2 days leave b4 I start my new job, I went to JPN to replace my faulty IC and change the address as well.
I went to the JPN office at Butterworth around 11 am. There not much people there. You need to make sure u have all the thing before u go take number.
Things needed to replace faulty IC is
a) IC (original and photocopy)
b) replacement form.
Changing address u need to bring one utility bill (any month also ok) with new address.
After u fill in the form u go to the counter and take number and have a seat. When ur number is call go to the designated counter and give all the document to the person. They will process everything to u.
It only took me 15 minute to complete the whole process.
The next day I went to the immigration office to do my passport. This is the first time I doing a passport. The last time I go out of Malaysia is like maybe 15 years ago. Last time I have my passport attach to my mom passport.
I went to the immigration office around 10am. There a lot of people there seating down waiting already.
Thing to bring:
a) IC (original and photocopy) **(If u replace ur IC like me askfor JPN 09 resit when u do ur IC without that u cannot do passport)
b) 2 passport size photo
c) fill in the form
d) CASH - RM100 32 page 2 years
RM300 32 page 5 years
RM600 64 page 5 years
After fill in the form take ur number and wait for ur turn. There are TV around for u to see but there no free WIFI.
Just pass all the document to them and they will check if u are blacklisted. They will process everything and u just seat and wait for ur turn to pay the money (cash only no Cradit Card)
After pay there will tell u what time came back and take the passport. (Normally 2 hour)
If u applied in Butterworth, u can spend the 2 hour in Tesco Extra. That the nearest shopping place to go.
Its kind of easy now to applied Passport and replace ur old faulty IC.
No picture in this post to protect my security. hehe..
I will be going to SG in Feb.
I went to the JPN office at Butterworth around 11 am. There not much people there. You need to make sure u have all the thing before u go take number.
Things needed to replace faulty IC is
a) IC (original and photocopy)
b) replacement form.
Changing address u need to bring one utility bill (any month also ok) with new address.
After u fill in the form u go to the counter and take number and have a seat. When ur number is call go to the designated counter and give all the document to the person. They will process everything to u.
It only took me 15 minute to complete the whole process.
The next day I went to the immigration office to do my passport. This is the first time I doing a passport. The last time I go out of Malaysia is like maybe 15 years ago. Last time I have my passport attach to my mom passport.
I went to the immigration office around 10am. There a lot of people there seating down waiting already.
Thing to bring:
a) IC (original and photocopy) **(If u replace ur IC like me askfor JPN 09 resit when u do ur IC without that u cannot do passport)
b) 2 passport size photo
c) fill in the form
d) CASH - RM100 32 page 2 years
RM300 32 page 5 years
RM600 64 page 5 years
After fill in the form take ur number and wait for ur turn. There are TV around for u to see but there no free WIFI.
Just pass all the document to them and they will check if u are blacklisted. They will process everything and u just seat and wait for ur turn to pay the money (cash only no Cradit Card)
After pay there will tell u what time came back and take the passport. (Normally 2 hour)
If u applied in Butterworth, u can spend the 2 hour in Tesco Extra. That the nearest shopping place to go.
Its kind of easy now to applied Passport and replace ur old faulty IC.
No picture in this post to protect my security. hehe..
I will be going to SG in Feb.
Subscribe to:
Posts (Atom)